Description:
Fair. Underlining/marginal notes on approx. 150 pp throughout (25% of book). Mild cover wear with rubbing of corners. Sound binding. Previous owner's name written inside front cover. A good study copy.
Home
Mineral Industries Series: Introduction to Ferrous Metallurgy: Ferrous Metallurgy: Vol. 1 by TEICHERT, Ernest J - 1944
Mineral Industries Series: Introduction to Ferrous Metallurgy: Ferrous Metallurgy: Vol. 1 by TEICHERT, Ernest J - 1944
by TEICHERT, Ernest J
Mineral Industries Series: Introduction to Ferrous Metallurgy: Ferrous Metallurgy: Vol. 1
by TEICHERT, Ernest J
- Used
- very good
- Hardcover
New York: McGraw, 1944. Hardcover. Very Good. 2nd impression. Very good plus/hardcover. Corners slightly bent. Edges of spine slightly rubbed. Please Note: This book has been transferred to Between the Covers from another database and might not be described to our usual standards. Please inquire for more detailed condition information.
- Bookseller Between the Covers- Rare Books, Inc. ABAA (US)
- Format/Binding Hardcover
- Book Condition Used - Very Good
- Quantity Available 1
- Binding Hardcover
- Publisher McGraw
- Place of Publication New York
- Date Published 1944
Ferrous Physical Metallurgy
by Teichert, Ernest J.; Fisher, John L
- Used
- Hardcover
- Condition
- Used - Fair/Poor
- Jacket Condition
- None
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Blairsville, Georgia, United States
- Item Price
-
$8.95
Show Details
Item Price
$8.95
Introduction to Ferrous Metallurgy: Ferrous Metallurgy Volume I
by Ernest J. Teichert
- Used
- good
- Hardcover
- Condition
- Used - Good
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Goring-by-Sea, West Sussex, United Kingdom
- Item Price
-
$7.72
Show Details
Description:
McGraw-Hill Book Company, 1944. Hardcover. Good. 1944. Second Edition Second Impression. 484 pages. No dust jacket. Brown cloth boards. Contains black and white illustrations and illustrated plates. Volume I. Pages remain bright and clear with minimal tanning and foxing. Previous owner's stamp to half-title page. Small area of loss to front free endpaper. Previous owner's inscription to front pastedown. Minor water staining to bottom corners of text-block. text is not affected. Binding remains firm. Boards have moderate edge wear with bumping to corners and rubbing to surfaces. Scuffing and light marking overall. Minor water staining and grey mark to rear board. Minimal crushing to spine ends. Book has a slight forward lean.
Item Price
$7.72
Ferrous Physical Metallurgy
by Teichert, Ernest J. And John L. Fisher
- Used
- very good
- Hardcover
- Condition
- Used - Very Good
- Jacket Condition
- No Jacket
- Edition
- Fourth Edition
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Gastonia, North Carolina, United States
- Item Price
-
$15.00
Show Details
Description:
University Park, PA: Pennsylvania State University Press, 1959. Fourth Edition . Hardcover. Very Good/No Jacket. 8vo - over 7¾" - 9¾" tall. ix, 589 pp. Stains on front and rear endpapers left through contact with cellophane tape. Foxinbg to page fore-edges. The binding is tight and square, and the text is clean and bright.
Item Price
$15.00
Ferrous Metallurgy: Volume III
by TEICHERT, Ernest J
- Used
- good
- Hardcover
- Condition
- Used - Good
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Gloucester City, New Jersey, United States
- Item Price
-
$18.00
Show Details
Description:
PA: PA State College, 1940. Hardcover. Good. Good hardcover. Volume 3 only. Pages light brown. Some writing in ink and some in pencil and some underlining inside covers and endpapers. Corners rubbed and bent. Bottom edge of spine starting to fray. Spine light brown on red cover. Please Note: This book has been transferred to Between the Covers from another database and might not be described to our usual standards. Please inquire for more detailed condition information.
Item Price
$18.00
The Manufacture & Fabrication of Steel, Ferrous Metallurgy Vol. II
by Teichert, Ernest J
- Used
- good
- Hardcover
- Condition
- Used - Good
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Anaheim, California, United States
- Item Price
-
$19.19
Show Details
Description:
McGraw-Hill. Good. 1944. Hard Cover.
Item Price
$19.19
The Manufacture and Fabrication of Steel: Ferrous Metallurgy, Volume 2, Second Edition (Mineral Industries Series)
by Ernest J. Teichert
- Used
- Hardcover
- Condition
- Used Good
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Kutztown, Pennsylvania, United States
- Item Price
-
$19.99
Show Details
Description:
McGraw-Hill Book Company Inc, 1944. Hardcover. Used Good. Front and back covers have wear to edges and corners. Spine intact, some wear. Binding is intact. Pages are clean with light edge or corner wear. There is a previous owner's name on the inside. We carry new and used books in our storefront. We want you to be satisfied with your purchase. Please contact us if you have questions regarding this item.
Item Price
$19.99
Metallography and Heat-Treatment of Steel, Volume 3: Ferrous Metallography, 2nd edition
by Teichert, Ernest J
- Used
- good
- Hardcover
- Condition
- Used - Good
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Simi Valley, California, United States
- Item Price
-
$24.75
Show Details
Description:
McGraw-Hill Book Company, 1944-01-01. Hardcover. Good. . Ex-library copy with usual markings. Cover shows light shelf wear. Pages are clean and intact.
Item Price
$24.75
THE MANUFACTURE AND FABRICATION OF STEEL: Volume II - Ferrous Metallurgy
by Teichert, Ernest J
- Used
- Hardcover
- Condition
- Used - Very Good -
- Jacket Condition
- No Jacket
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Seneca, Pennsylvania, United States
- Item Price
-
$25.00
Show Details
Description:
New York: McGraw-Hill Book Co., 1944. 487pp, illus., v. 2 only, 'Mineral Industries Series', some rubbing & shelfwear to cover, tape tp eps.. Cloth. Very Good -/No Jacket.
Item Price
$25.00
Introduction to Ferrous Metallurgy Volume 1
by Teichert, Ernest J
- Used
- very good
- Hardcover
- Condition
- Used - Very Good
- Binding
- Hardcover
- Quantity Available
- 1
- Seller
-
Spokane Valley, Washington, United States
- Item Price
-
$24.75
Show Details
Description:
McGraw-Hill, 1944. Hard Cover - VG - No dust jacket if issued - Book is clean and tight with light wear - Illustrated - Index - 484 pages.. Hard Cover. Very Good.
Item Price
$24.75
Stock Photo: Cover May Be Different
Introduction To Ferrous Metallurgy - Vol I
by Ernest J. Teichert
- Used
- good
- Paperback
- Condition
- Used - Good
- Binding
- Paperback
- ISBN 13
- 9781406717815
- ISBN 10
- 1406717819
- Quantity Available
- 1
- Seller
-
HOUSTON, Texas, United States
- Item Price
-
$41.02
Show Details
Description:
Maurois Press, 2007-03-15. Paperback. Good.
Item Price
$41.02